联系电话

The current position:home > product > Waste gas treatment > Mini-exhaust absorber

Mini-exhaust absorber


Mini-exhaust absorber



Brief introduction

   Our company has endeavored to develop the environmentalprotection devices for many years, including WQX exhaust absorption device withthe reverse absorption procedure for recovering the chlorine hydride, hydrogenfluoride or treating the industrial exhaust like sulfur dioxide, nitrogen oxideetc. On one side, it can recover the soluble gas and turn the waste to the treasure,on the other hand, purify the gas and standardize the pollutant. Since itslaunch in the market, it has achieved great favor from the customers. With thedevelopment of our chemical industry and continuous increase of the nationalrequirement on the environmental protection, the mini chemical enterprises andsome food as well as the electronic industry are also included in therequirement of the environmental protection. The characteristics of theenterprises are: less quantity of the exhaust, small concentration, but it isnot feasible if not treated. A set of regular exhaust absorber needs minimum100,000 Yuan even more than several ten thousands to several million.  With the large amount of investment andcovering area as well as the installment and debugging at the spot, it is notconvenient.

   On the basis of the above, our company newly promotes themini exhaust absorber, the device integrates the film falling absorber, fillingabsorber, water jet vacuum unit, acid tank and circulation pump (differentmodels) to one device, and sets the cooler inside the acid tank with the compactstructure. the installment and debugging have been finished before leaving thefactory, the users only needs connect the water and power on ( or simplyassemble) after receiving, then it can put into use.

   The allocation and absorption grades of the device can becustomized as the requirement of the users and local environmental protection,the grades can be freely selected among grade 1- 5.The specification is notfixed from several cubic meters to several thousand cubic meters.

Application range

Some difference you should know

I.         Qualification

and are authorized. The enterprises without thecertificate are not allowed to manufacture the relative products and thepurchase users will also take a risk on it.

II.      Design capability

With25 years of the safety production experience, we can guarantee the design ofeach device in compliance with the industrial standard, even exceed it, and itis proved to be safe after the practical use.

Meanwhile,we provide the technology support of exhaust absorption for many domesticenvironmental protection institutes.

III.    Materials selection

The products are certainly worth it and thesafety is the utmost.

IV.    The processing technology

When most of the similar manufacturers relied onthe manual welding processing device, we adopted to combine different weldingtechnologies like German hot melted butt-joint welding and extruding weldingetc. The welding strength was improved. Meanwhile, it put an end to thedisorder emotion and empiricism influence onthe device quality.





The factory real map
  • Factory gate real
  • Plant area real
Product drawing
  • Be fully equipped for
  • Safety point of view
  • The national marketing
The warehouse is shown in Figure
  • Rich warehouse
  • Stock
  • Stock
  • Semi finished products unit water tank
Product verification
  • The factory inspection
  • Custom(LargeLCSP-2*600-300-600The roots of water jet vacuum unit)
Propaganda
  • Exhibition publicity
  • Exhibition publicity
To share:

[点击关闭]
qq客服在线客服