联系电话

The current position:home > product > Waste gas treatment > falling film absorber

falling film absorber


falling film absorber


 


The photos are takenwith real product, if there is the same, it is plagiarized.


Briefintroduction

   Yilig raphite modified PP falling film absorber is the newly developed falling filmabsorber after the traditional graphite absorber. The products are mainlyapplied to suction HCL gas to product hydrochloric acid,also for the suction of the soluble corrosive gas like HFSO2NH3P2O5H2S etc.Moreover, it can be applied in the falling film steam device for the corrosivemediums with medium-low boiling point.

   The product is integrated PP structure with good anti-corrosive and good physicalmechanical properties. Our falling film absorber adopts the suction pipe madeof specialized 50%(weight ratio ) graphite modified PP pipes, the specificationΦ18×1.5mm with good film forming and higher heat transferring.

   The product is the ideal absorption device with its excellent property for themoment. If working in with the filled tower, and take the example of suctionHCL for preparing the hydrochloric acid, the absorption rate is up to 99%, andthe hydrochloric acid can reach 30% or above.



The model description

   

The characteristics

1.      Excellent anti-corrosive properties, it canalmost resist all the inorganic medium and most organic solvents.

2.      High absorption rate. Good effect ofself-cooling and low exit temperature without the necessity of re-cooling,stable operation.

3.      Not easily deposit.

4.      Convenient installment and maintenance, lessmaintenance work.

5.      Low price, 50%-70% of the graphite falling filmabsorber; long service price.


Application range

Allowable temperature: -2080   0120(PP)

Allowable pressure( normal temperature): shellpass≤0.3Mpa   Piping pass≤±0.1Mpa

Allowable medium: please take the corrosionproperty of PP as a reference when there is no information or there is otherspecial requirement, it can take the experiment according to GB11547-89.


Somedifference you should know

I.         Qualification

and areauthorized. The enterprises without the certificate are not allowed to manufacturethe relative products and the purchase users will also take a risk on it.

II.      Design capability

With 25 years of the safety productionexperience, we can guarantee the design of each device in compliance with theindustrial standard, even exceed it, and it is proved to be safe after thepractical use.

III.    Materials selection

The productsare certainly worth it and the safety is the utmost.

IV.    The processing technology

When most ofthe similar manufacturers relied on the manual welding processing device, weadopted to combine different welding technologies like German hot meltedbutt-joint welding and extruding welding etc. The welding strength wasimproved. Meanwhile, it put an end to the disorder emotion and empiricism influence on the device quality.






The factory real map
  • Factory gate real
  • Plant area real
Product drawing
  • Be fully equipped for
  • Safety point of view
  • The national marketing
The warehouse is shown in Figure
  • Rich warehouse
  • Stock
  • Stock
  • Semi finished products unit water tank
Product verification
  • The factory inspection
  • Custom(LargeLCSP-2*600-300-600The roots of water jet vacuum unit)
Propaganda
  • Exhibition publicity
  • Exhibition publicity
To share:

[点击关闭]
qq客服在线客服