联系电话

The current position:home > product > Vacuum equipment > Water jet vacuum unit

Water jet vacuum unit


Water jet vacuum unit


(专利号:ZL2008201895343)

(If you worry about the water usage of thedevice, you can consider our super water-saving unit)

Brief introduction

   Yili series water jet vacuum unit is the vacuumdevice developed by our company. Take the water jet vacuum pump as the vacuumproducing elements, and integrate the dynamic power, circulation water tank,vacuum measurement and control as the new type of vacuum unit. This type can suctionthe corrosion gas within 150 , and work with steamjet pump in series. With higher vacuum, it is widely applied in the industrieslike chemical industry, pharmacy, textile, food, brewery, metallurgy and environmentalprotection etc. It mainly applies the technologies like vacuum absorption,filtering, concentration, transportation, deoxidization and oxygenation etc. Thedevice is the ideal product to replace SZ type water ring pump and W reciprocalvacuum pump.

   The water jet vacuum unit for the environmentalprotectionSPBZ-W-360passed the new product appraisal by Zhejiang Province.(Detailssee the News)


The model description

The photos are taken with the real product, ifit is the same, it is plagiarized.



The model and technique parameters


 The properties in the meter is the gas at 20, the airpressure 1013.25hpa ( amounts to 760mmHg), the relative humidity of the gas70%, the water supply temperature of the water circulation 15

Air suction speedallowance±10%

Vacuum degree value inthe meter means the pressure less than the standard atmospheric pressure.

(1mmHg=1Torr(托)=133.3Pa(帕)0.1Mpa=750mmHg)。


Some difference youshould know

1.      The tank is made by the entire right angle edgefolding, the welding seam is automatically welded with the butt-joint machine,the quantity of the welding seams are less(the initial welding seams are reducedto 2-4 seams), the strength of the tank is much higher, effectively extend theservice life of the main framework and protect the users’ investment.

2.      The unique design of the defoaming bucket forthe heat radiation, it can avoid to bring the non-concentrate gas to the waterand make the full rapid radiation of the heat, which can ensure the workefficiency of the centrifugal pump, and keep the stable vacuum degree at higherwater temperature. Most of the congealable waste gas dissolves into thecirculation water, and it is much more effective environmental protection thanthe normal pump or mechanical pump.


      3、Add the manhole waterseal and environmental protection connector on the tank, the gas will notoverflow, which can satisfy the higher environmental protection demand of theusers. The input of the water pump joins the filtering mask to prevent the foreignmatter and damage the equipment.
      4、
The bottom of thewater tank is much thicker with the complete corrosion resistant.(Somefactories will suggest the customers to choose the iron bottom, but the bottommaterials are very thin. After some period, the partial bottom will decay whichcauses the imbalance of the device and greater oscillation, and the device iseasily damaged.)

SPBZ-L Water jet vacuum unit photos taken withthe real product


The design is original, if there is the same, itis plagiarized.


The factory real map
  • Factory gate real
  • Plant area real
Product drawing
  • Be fully equipped for
  • Safety point of view
  • The national marketing
The warehouse is shown in Figure
  • Rich warehouse
  • Stock
  • Stock
  • Semi finished products unit water tank
Product verification
  • The factory inspection
  • Custom(LargeLCSP-2*600-300-600The roots of water jet vacuum unit)
Propaganda
  • Exhibition publicity
  • Exhibition publicity

[点击关闭]
qq客服在线客服